Reference Tables
Push Force Reference Table by Cart Load and Floor Condition
Compare cart push force by loaded weight, rolling resistance, and floor grade, with reference tables and field checks for starting and running effort.
Read articleReference Tables
Sourced reference tables for caster and industrial wheel inputs, comparisons, and result interpretation.
Reference Tables
Caster Mounting Height Tables for Benches and Carts
Compare caster mounting height tables, measure plate and stem fit, and calculate how replacement casters change bench and cart heights.
Read articleReference Tables
Wheel Diameter Tables for Thresholds and Ramp Routes
Compare wheel diameter tables for thresholds and ramp routes using step geometry, grade, caster mounting height, and measured route conditions.
Read articleReference Tables
Caster Capacity Tables by Loaded Cart Weight and Wheel Count
Use caster capacity tables by loaded cart weight and wheel count, compare support assumptions, and check required ratings against manufacturer data.
Read articleReference Tables
Caster Floor Pressure Reference Tables by Wheel Type
Compare caster floor pressure by wheel type, calculate psi and psf from wheel load and contact area, and check floor-rating limitations.
Read articleReference Tables
Ramp Grade, Slope Angle, and Caster Brake Selection Tables
Convert ramp grade to slope angle and downhill holding force, then compare caster brake types, manufacturer ratings, and site conditions.
Read article